---
title: "Stratodesk Agent Installation"
slug: "stratodesk-agent-installation"
tags: ["ControlUp for Desktops", "Edge DX Agent", "Integration", "Stratodesk"]
updated: 2026-07-22T11:35:15Z
published: 2026-07-22T11:35:15Z
canonical: "support.controlup.com/stratodesk-agent-installation"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.controlup.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Stratodesk NoTouch Agent Installation

Important

Before you deploy any Agents, read the [prerequisites for Agent deployment](/tim-reorg/docs/prerequisites-for-agent-deployment) and make sure that your environment is ready.

ControlUp for Desktops supports NoTouch OS version 3.3.432 or higher. The integration installs the Agent version that is packaged with your Stratodesk OS version.

## Before You Begin

You'll need your ControlUp **tenant name** and **device registration code**. To get these values, go to **Devices > Configuration > Downloads**. ![Access Agent Registration Settings Page](https://cdn.document360.io/098100b7-b9da-4bea-b4b9-017140ab863e/Images/Documentation/AccessAgentRegistrationSettings(3).png)

## Integration Setup in Stratodesk

To set up the integration in Stratodesk:

1. Go to your NoTouch OS configuration and select **Services > ControlUp**.

![ControlUp service in Stratodesk.](https://cdn.document360.io/098100b7-b9da-4bea-b4b9-017140ab863e/Images/Documentation/Stratodesk1.png)
2. Enable **Start ControlUp EdgeDX** and paste your tenant name and device registration code.
3. Save your changes in Stratodesk.

After you save your configuration changes, the Agent is installed on the device and automatically connects to your ControlUp environment.

## Updating the Agent

The Agent is built into Stratodesk NoTouch OS, so you can't manually update the Agent. Contact Stratodesk if you need to use a newer version of the Agent.

## Troubleshooting

You can access the Agent log files from a terminal on the Stratodesk device. To learn how to access the log files and confirm that the Agent has been installed correctly, [read this ControlUp blog](https://www.controlup.com/resources/blog/entry/reduce-spend-controlup-edge-dx-on-stratodesk/).

### Enable NTP Time on the Device

If the Agent is installed but you aren't able to see the device in ControlUp, make sure that the Stratodesk device uses NTP time. For details on how to enable NTP time, see the [Stratodesk documentation](https://kb.stratodesk.com/time_and_time_zone).